23-10
Mahindra USA, Inc. All Rights Reserved.
Alternator Belt
Power Steering Belt
Compressor Belt (if equipped with HVAC)
1. Position the ROXOR on a flat level surface.
2. Verify the engine is off and parking brake set.
3. Loosen the pivot bolt and lock bolt / nut.
4. If replacing belt, move the component toward the engine to
remove the old belt.
5. Tension belt by moving component away from engine with
adjustment screw or pry bar. Belt should have about ¼ to "½"
(6.35 to 12.7 mm) of deflection when pushed between
longest belt span.
6. Tighten locking bolt / nut and pivot bolts.
Maintenance Procedures
To Next Page
Loading...
