Repair Manual MAN-
00190
THAR CRDe BS-IV MAY 2012/Rev
1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by
the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of
Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2012 Mahindra & Mahindra Ltd.
2 Nm.
Lever Fittment -
• Apply inadequate sealant on the adaptor
pivot bottom side mating face.
Refer illustration.
• Put the rubber below over bottom lever and
adaptor pivot.
• After fitment of Bottom lever assembly into the Transmission, torque the adaptor pivot to 24
To Next Page
Loading...
