174 © Copyright Mahindra & Mahindra Ltd. v062012
HEATING, VENTILATION AND AIR-CONDITIONING SYSTEM
Temperature Control
By operating the temperature control knob, temperature of
air being discharged from various vents can be adjusted to
the desired level. Engine coolant is utilized to heat whereas
the air conditioner is used to cool the air inside the AC unit.
Based upon selected position of the temperature control dial,
the desired discharged air temperature can be obtained.
By rotating the dial counter-clockwise and setting it to the
extreme left position, cool air is discharged.
When the dial is rotated clockwise, the discharge air progres-
sively starts getting warmer.
By rotating the dial further in the clockwise direction and
setting it to the extreme right position, hot air is discharged.
Blower Speed Control (Automatic Climate Control)
Blower force-circulates air through the HVAC unit and
distributes it throughout the passenger compartment.
To increase the blower speed, rotate the control dial
clockwise (B) and to reduce the blower speed, rotate the dial
counter clockwise (A).
A Cool Air B Hot Air
A B
A
B
To Next Page
Loading...
