EasyManua.ls Logo

Mahindra XUV500 2012 - Vehicle Self-Maintenance Precautions

Mahindra XUV500 2012
334 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
274 © Copyright Mahindra & Mahindra Ltd. v062012
MAINTENANCE
foreign material contamination should be inspected
immediately by a qualified expert such as the factory-trained
technicians at your Authorized Mahindra Dealer. Your vehicle's
oils and fluids should be changed at the specified intervals or
in conjunction with a repair.
Chemicals and Additives
Non-Mahindra approved chemicals or additives are not
required for factory recommended maintenance. In fact,
Mahindra recommends against the use of such additive
products unless specifically recommended by Mahindra for a
particular application.
Your vehicle is very sophisticated and built with multiple
complex performance systems. Every manufacturer develops
these systems using different specifications and performance
features. That's why it's important to rely on your Authorized
Mahindra Dealer to properly diagnose and repair your vehicle.
When planning your maintenance services, consider your
Authorized Mahindra Dealer for all your vehicle's needs.
Get the most from your service and maintenance visits
Getting your vehicle serviced at Authorized Mahindra Dealer
adds great value to your vehicle in number of ways. Hence, it
is recommended to service your vehicle at Authorized
Mahindra Dealer only.
Vehicle Self Maintenance - General Precautions
Refer relevant sections of the manual before starting
Set the parking brake
Block the wheels to prevent the vehicle from moving
unexpectedly
Turn OFF the engine and remove the key
Stay clear of hot vehicle parts
Avoid repeated contact with fluids
Do not let fuel, coolant and other fluids spill over elec-
trical and hot vehicle parts
Keep all open flames and other burning material like
cigarettes away from the battery and all fuel related
parts
WARNING
!
Do not start/run the engine when any engine/
peripheral parts are removed.
Opening the Hood
The hood release lever is located in the driver side foot well
area, below the instrument panel. To open the hood, follow
the steps below;

Table of Contents

Related product manuals