Major tech MTD70T - AC Voltage True RMS; DC Voltage; Resistance (Auto Ranging)

200mV 0.1mV ±1.5% of rdg±10 digits
2.00V 1mV
20.0V 10mV ±1.0% of rdg±5 digits
200V 0.1V
600V 1V ±1.2% of rdg±5 digits
Range Resolution
4.2. AC Voltage True RMS
Accuracy (% of reading + digits)
Input impedance 10MΩ. protection 600V DC or RMS of AC.
Frequency response 60V at 40Hz to 1kHz (sine), other ranges 50/60Hz
(all wave).
200mV 0.1mV
2.00V 1mV
±0.5% of rdg±5 digits
20.0V 10mV
200V 0.1V
600V 1V ±1.2% of rdg±5 digits
Range Resolution
4.3. DC Voltage
Accuracy (% of reading + digits)
Input impedance on 200mV range >40MΩ all other ranges 10MΩ.
Overload protection 600V DC or RMS of AC.
Input Protection: 250V DC or Peak value of AC.
Note: a. On 200Ω range, short the test leads to measure lead resistance,
then subtract the value from the real measurement.
b. When measuring resistance over 1MΩ, it is normal that the
reading reacts slowly, wait until reading is stable.
200.0Ω 0.1Ω ±0.8% of rdg±5 digits
2.000kΩ 1Ω
20.00kΩ 10Ω
±0.8% of rdg±1 digits
200.0kΩ 100Ω
2.000MΩ 1kΩ
20.00MΩ 10kΩ ±1.2% of rdg±5 digits
Range Resolution
4.4. Resistance (Auto Ranging)
Accuracy (% of reading + digits)
7