MAJORITY BEN NEVIS User Manual

9
Optional: Using a Optical Input
Instrucons Guide
You will need: An audio source with an Optical Audio Output and a Digital
Optical Audio cable (not included)
Connect the Digital Optical Audio cable to the optical output on
the TV and to the Optical Input on the speaker bar.
Press the POWER button on side panel or POWER button directly
on the remote control to switch on the unit.
Press the OPT button on the remote control to switch to Optical
mode or select the MODE button on the sound bar repeatedly
to select the Optical mode. OPT will now display on the front
control panel of the soundbar.
Using the native controls on your connected device, make
sure the audio settings are set to PCM or Optical Audio and are
turned On.
Audio from the connected audio source will now be played
through the speakers.

MAJORITY BEN NEVIS Specifications

General

Brand	MAJORITY
Model	BEN NEVIS
Category	Speaker System
Language	English