17
FM Scan Setting
Choose between scanning strong and weak signals (All) or only
the stations with strong signal (Only).
Press the ‘Menu’ button (Ref.) on the remote. To make your
choice, use the ‘Previous/Next’ buttons (Ref./23) to choose
your option.
Select “FM Scan Setting” and press the ‘Enter’ button (Ref.).
Press the ‘Previous’ (Ref.) or ‘Next’ (Ref.) button to choose
between “Strong stations only” or “All Stations”, press the ‘Enter’
button (Ref.) to conrm your choice.
To tune a specic frequency manually
To listen to a specic frequency press and hold ‘Next’ (Ref.) on
the remote to search forward quickly and ‘Previous’ (Ref.) to
search back quickly. It will stop
searching when the button is released. To search slowly press
the ‘Next’ (Ref.) or ‘Previous’ button (Ref.) on the remote
multiple times rather than holding.
Instrucons Guide
To Next Page
