18
Audio Settings Mono or Stereo
All stereo stations are reproduced in stereo. For weak stations
this can result in poor audio quality. The audio quality can be
improved using mono.
Press the ‘Menu’ button (Ref.) on the remote. To make your
choice, use the ‘Previous/Next’ buttons (Ref./23) to choose
your option.
Choose “Audio Setting” and press the ‘Enter’ button (Ref.).
Press the ‘Previous’ (Ref.) or ‘Next’ (Ref.) buttons to choose
between “Stereo allowed” or “Forced mono”, press the ‘Enter’
button (Ref.) to conrm your choice.
How to store a preset station
Up to 40 stations can be set. To store a station that you are
currently playing:
Press and hold ‘Program’ button (Ref.) on the remote for 3 to 5
seconds. “<1: [Empty]” will show on the display.
Press ‘Previous’ button (Ref.) or ‘Next’ (Ref.) to change the
“<1” to the number you want to store the station as. Then press
‘Enter’ button (Ref.) on the remote to save. The display will
then show “Preset [1] stored”.
Instrucons Guide
To Next Page
