3 | P a g e
A. The mBot2 Vehicle
Documentation
MBot2 Introduction
https://education.makeblock.com/help/cyberpi-series/cyberpi-series-cyberpi-
series-packages-and-extensions/mbot2-introduction/
Operational Guide
https://education.makeblock.com/help/cyberpi-series/cyberpi-series-cyberpi-
series-packages-and-extensions/mbot2-operational-guide/
Python Reference
https://www.yuque.com/makeblock-help-center-en/mcode/cyberpi-api-
shields#9eo89
mBuild Modules (Ultrasonic Sensor 2, Quad RGB Sensor)
https://www.yuque.com/makeblock-help-center-en/mcode/cyberpi-api-mbuild
or
https://education.makeblock.com/help/mblock-python/mblock-python-editor-
python-api-documentation-for-devices/mblock-python-editor-python-api-
documentation-for-cyberpi/mblock-python-editor-apis-for-mbuild-modules/
The Build The Connections
(Ultrasonic into the mBuild port, motors to EM1/EM2)
The Power Switch must be turned on
before the you can upload code
To Next Page
Loading...
