MAKEiD S1 Pro - Charging Method; Safety Notes

6. How to Stick the Label
Each label comes with an adhesive on the backside. Tear off the backing paper before sticking it
onto any object surfaces.
7. Charging Method
The printer is powered by lithium battery with a Type-C input port of 5v=2A charging input;
Please use the Type-C charging cable that comes with the printer. Charge the printer by using a
standard Type-C charging head;
If the printer is left unused for a long period, please charge once every 3 months in case the
lithium battery cannot be recharged due to natural wear and tear over time.
Printer Parameter
Printing Method
Thermal Printing
Printing Resolution
203dpi
Supported Label Type
Die-cut Label
Label Tearing Method
Manually
Printing Width
12mm
Compatible Label Width
9-12mm wide；7.4m long
Printer Size
85.5mm*85.5mm*33mm
Package Size
117mm*117m m*43mm
Battery Capacity
3.7v/1450mAh
Battery Life
90 days
Connection Method
Bluetooth connection/ Shortcut button panel operation
Safety Notes
Your personal safety is very important in the operation and maintenance of the product. This
manual includes warnings and precautions for safe operation. Please read carefully and
understand all warnings and precautions before use.
Do not attempt to repair or adjust the product yourself. If you still fail to fix the troubles
according to the suggested methods described in this manual, please power off the product
and contact us at jryx@jingjingfun.com for further assistance.