19
ENGLISH
FAQ
Q: How long will the cutting blades last?
A: A single blade cuts between 80-120 designs. The life of the blade may vary
depending on the design size, pattern and type of paper selected.
Q: Do you hold the Start button while cutting?
A: No. Press the Start button only once to begin cutting.
Q: Do you hold the Slice™ unit in place during the entire cutting process?
A: Yes. Hold it lightly with both hands as described in “Basic Operations.”
This prevents the unit from moving during the cutting process.
Q: How long does it take to charge the battery?
A: Approximately 1 hour.
Q: How long does the battery charge last?
A: Approximately 90 minutes of cutting, though this may vary.
Q: What type of materials can the Slice™ cut?
A: Paper, cardstock, vellum, thin vinyl, thin acetate and photos.
Q: Why do some letter designs not cut to 4 inches?
A: Letters are proportional.
Q: How are shapes measured?
A: The distance from the highest point on the top to the lowest point
on the bottom of the design.
Q: Can the Slice™ be used while plugged in?
A: Yes.
Q: Can I leave the unit plugged in while not in use?
A: Yes, this will charge the battery.
Q: How do I stop the Slice™ in the middle of a cut?
A: Cancel it by pressing the MENU button on the keypad.
To Next Page
Loading...