2 ENGLISH
SPECIFICATIONS
Model: AT638A
Air pressure 0.49 - 0.83 MPa (4.9 - 8.3 bar)
Staple length 13 mm - 38 mm
Staple capacity 100 pcs.
Minimum hose diameter 6.5 mm
Pneumatic tool oil ISO VG32 or equivalent
Dimensions (L x W x H) 230 mm x 75 mm x 251 mm
Net weight 1.2 kg
without notice.
Symbols
-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Wear safety glasses.
Intended use
furniture work.
SAFETY WARNINGS
Pneumatic nailer/stapler safety
warnings
WARNING: WARNING Read all safety warn-
ings and all instructions. Failure to follow the
Save all warnings and instruc-
tions for future reference.
For personal safety and proper operation and mainte-
using the tool.
General safety
1.
Do not permit those uninstructed to use the tool.
2. No horseplay. Respect the tool as a working
implement.
3.
alcohol, drugs or the like.
4. Never alter the tool.
Personal protective equipments
1. Always wear safety glasses to protect your
eyes from dust or fastener injury.
WARNING: It is an employer's responsibility
to enforce the use of safety eye protection
equipment by the tool operators and by other
persons in the immediate working area.
For Australia and New Zealand only
Always wear safety glasses and face shield to
protect your eyes from dust or fastener injury.
2. Wear hearing protection to protect your ears
against exhaust noise and head protection.
Also wear light but not loose clothing. Sleeves
should be buttoned or rolled up. No necktie
should be worn.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate the tool in explosive atmo-
liquids, gases or dust. Operating the tool can
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating the tool. Distractions can cause you to
lose control.
4.
5.
There may be local regulations concerning
noise which must be complied with by keeping
noise levels within prescribed limits. In certain
cases, shutters should be used to contain noise.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
