Need help?Do you have a question about the Makita DDF481 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Max Torque | 115 Nm |
| Speed Settings | 2 |
| No Load Speed (Low) | 0-550 rpm |
| No Load Speed (High) | 0-2, 100 rpm |
| Chuck Capacity | 1.5 - 13 mm |
| Max. in steel | 13 mm |
| Max. in wood | 76 mm |
| Battery Type | Li-ion |
| Length | 205 mm |
To Next Page
