Makita DUR365UPM2 User Manual

Makita DUR365UPM2

112 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

1

GB

Cordless Grass Trimmer INSTRUCTION MANUAL

S

Batteridriven grästrimmer BRUKSANVISNING

N

Batteridrevet gresstrimmer BRUKSANVISNING

FIN

Akkukäyttöinen viimeistelyleikkuri KÄYTTÖOHJE

LV

Bezvada zles trimers LIETOŠANAS INSTRUKCIJA

LT

Belaid žoliapjov NAUDOJIMO INSTRUKCIJA

EE

Akuga murutrimmer KASUTUSJUHEND

RUS

 

  

DUR365U

Questions and Answers:

M
Mark GonzalezAug 10, 2025
Why does my Makita Trimmer motor stop running after a little use?
- M
  michelle38Aug 10, 2025
  If your Makita Trimmer motor stops running after a short period, it could be due to a few reasons. First, check the reversing switch to ensure the rotation is in the correct direction. If the battery charge is low, recharge the battery cartridge; if recharging isn't effective, replace the battery. Overheating could also be the cause, so stop using the tool to allow it to cool down.
S
samanthasolomonAug 17, 2025
Why doesn't my Makita DUR365UPM2 reach maximum RPM?
- A
  Amanda MarshallAug 17, 2025
  If your Makita Trimmer isn't reaching its maximum RPM, it could be due to a few reasons. Ensure the battery is installed properly as described in the manual. If the battery power is dropping, try recharging it, and if that doesn't work, replace the battery cartridge. If the issue persists, the drive system might not be functioning correctly and needs to be inspected by a qualified technician.
L
Lauren MasonAug 22, 2025
What to do if the cutting tool does not rotate on my Makita Trimmer?
- L
  Lori BookerAug 22, 2025
  If the cutting tool of your Makita Trimmer doesn't rotate and you need to stop the machine immediately, it could be due to several reasons. First, check if a foreign object is jammed between the guard and the nylon cutting head and remove it. Another potential cause is a loose cutter blade fastening nut, which you should tighten properly. Also, inspect the cutter blade for bending and replace it if necessary. If none of these steps resolve the issue, the drive system may not be working correctly, requiring professional repair.
P
petersonloriAug 28, 2025
Why won't the motor run on my Makita DUR365UPM2?
- M
  mharveyAug 28, 2025
  If your Makita Trimmer motor isn't running, the first thing to check is whether the battery cartridges are properly installed. If not, install them. If the battery is the problem (under voltage), try recharging it. If recharging doesn't work, replace the battery cartridge. If these steps don't solve the problem, the drive system may not be working correctly and should be inspected by a qualified technician.
J
jerry62Sep 4, 2025
What to do if my Makita DUR365UPM2 has abnormal vibration?
- A
  amandafieldsSep 4, 2025
  If your Makita Trimmer experiences abnormal vibration, requiring you to stop the machine immediately, there are several potential causes. One possibility is that one end of the nylon cord has broken; try bumping the nylon cutting head against the ground while it is rotating to cause the cord to feed. Also, the cutter blade might be bent, cracked, or worn, in which case you should replace it. A loose cutter blade fastening nut could also be the culprit, so tighten it properly. If these steps don't resolve the vibration, the drive system may need professional attention.

Makita DUR365UPM2 Specifications

General

Power Source	Battery
Battery Voltage	36V
Battery Type	Lithium-ion
Motor Type	Brushless
Vibration Level	2.5 m/s²
Line Diameter	2.0 mm
No Load Speed (Med)	5, 500 rpm
Spindle Size	M10 x 1.25

Related product manuals

Makita DUR365UPM5

Preview: Makita DUR365UPT2

Makita DUR365UPT2

Preview: Makita DUR365U

Preview: Makita DUR365UZ

Makita DUR365UZ

Preview: Makita DUR368A

Preview: Makita DUR369N

Preview: Makita DUR366L

Preview: Makita DUR364L

Makita DUR369AZ

Preview: Makita DUR368AZ

Makita DUR368AZ

Preview: Makita DUR369LPT2

Makita DUR369LPT2