Need help?Do you have a question about the Makita HP001G and is the answer not in the manual?
General| Drilling | Yes |
|---|---|
| Chiseling | - |
| Power source | Battery |
| Battery capacity | 4 Ah |
| Torque (max) | 125 N⋅m |
| Impact rate (max) | 39000 IPM |
| Impact rate (min) | 9750 IPM |
| Rated speed (max) | 2600 RPM |
| Rated speed (min) | 650 RPM |
| Chuck capacity (max) | 13 mm |
| Chuck capacity (min) | 1.5 mm |
| Drilling diameter in wood (max) | 152 mm |
| Drilling diameter in steel (max) | 20 mm |
| Drilling diameter in concrete (max) | - mm |
Weight and Dimensions| Depth | 282 mm |
|---|---|
| Width | 86 mm |
| Height | 182 mm |
| Weight | 2700 g |
Lists maximum drilling diameters for masonry, steel, and wood.
Specifies maximum screw sizes for wood and machine screws.
Details the no-load speed and impact rate ranges in low and high gears.
Provides the tool's overall length and net weight.
Lists compatible battery cartridge and charger models.
Explains symbols and the tool's intended applications.
Details noise emission levels and associated safety precautions.
Presents vibration emission values for impact drilling and metal drilling.
Covers fundamental safety rules applicable to all power tools.
Outlines safety practices for maintaining a safe work environment.
General safety guidelines applicable to all operations of the cordless hammer drill.
Covers proper charging, storage, and usage to extend battery life.
Details the procedure for inserting and removing the battery pack.
Explains how to check the remaining battery power using indicator lamps.
Explains how the tool protects itself from excessive current draw.
Details how the tool prevents damage from overheating.
Explains the tool's protection against low battery capacity.
Step-by-step guide for changing between low and high speed settings.
Instructions for correctly selecting drilling, hammer drilling, or screwdriving modes.
Step-by-step guide for setting the desired fastening torque level.
Explains technology protecting the user's wrist from sudden jolts.
Steps for inserting and removing drill bits or driver bits.
Guidance on holding the tool and avoiding overheating.
Step-by-step instructions for performing screwdriving tasks.
Tips for efficient drilling in wooden materials.
Techniques and advice for drilling into metal.
Step-by-step guide for effective hammer drilling.
To Next Page
