Models No.
Description
PRODUCT
T
ECHNICAL INFORMATION
CONCEPT AND MAIN APPLICATIONS
P 1/ 7
HP1640, HP1640F, HP1641, HP1641F
Hammer Drill 16 mm (5/8")
Models HP1640, HP1640F, HP1641, HP1641F have been developed
as the successor models to the current HP1620 series models, featuring
renewed external appearance.
Listed below are the differences among the four models.
These models are also available with plastic carrying case as “K” models;
HP1640K, HP1640FK, HP1641K, HP1641FK
Specification
Standard equipment
Optional accessories
Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input Output
Max. Output (W)
110
120
220
230
240
6.5
6.0
3.3
3.1
3.0
50/60
50/60
50/60
50/60
50/60
680
---
680
680
680
380
380
400
400
400
500
500
600
600
600
110/ Taiwan 5.6 50/60 590 340 500
Current (A)
Dimensions: mm (")
Width (W)
Height (H)
Length (L) 303 (11-7/8)
72 (2-13/16)
222 (8-3/4)
Note: The standard equipment for the tool shown above may differ by country.
Chuck key S-13 ........................ 1 (HP1640/ HP1640F only)
Key holder ................................. 1 (HP1640/ HP1640F only)
Side grip .................................... 1
Depth gauge .............................. 1
Plastic carrying case ................. 1 (”K” models only)
Drill bits
Keyless drill chuck set
Drill chuck set
Side handle set
Type 43 drill stand
Chuck key S-13 (HP1640/ HP1640F only)
Depth gauge
Blow-out bulb
Chuck capacity: mm (")
Chuck type
Reversing switch
No load speed: min-1= rpm
Impacts per min: min-1= ipm
Capacities: mm (") Steel
Concrete
Wood
Protection against electric shock
Power supply cord: m (ft)
Net weight: kg (lbs)
*Taiwan: 5m, Argentine: 2.5m
0 - 2,800
0 - 44,800
Keyed chuck
1.5 - 13 (1/16 - 1/2)
16 (5/8)
13 (1/2)
30 (1-3/16)
Yes
LED job light No/ Yes
Yes
Double insulation
1.8 (4.0)
2.0 (6.6)*
Variable speed control by trigger
HP1640/ HP1640F
Keyless chuck
No/ Yes
HP1641/ HP1641F
W
L
HP1640/ HP1640F
H
HP1641/ HP1641F
Model No.
Specifications
Model No. LED job light
HP1640
HP1640F
HP1641
HP1641F
Keyed
Keyed
Keyless
Keyless
No
Yes
No
Yes
Drill chuck type
To Next Page
Need help?
General
