Makita LS1017L User Manual

2
ENGLISH (Original instructions)
Contents
SPECIFICATIONS.......................................................................................................................................................2
ADDITIONAL SAFETY RULES FOR TOOL.................................................................................................................4
INSTALLATION............................................................................................................................................................6
FUNCTIONAL DESCRIPTION.....................................................................................................................................6
ASSEMBLY............................................................................................................................................................... 10
OPERATION..............................................................................................................................................................14
MAINTENANCE ........................................................................................................................................................18
OPTIONAL ACCESSORIES ......................................................................................................................................20
SPECIFICATIONS
Model LS1017 / LS1017L
Blade diameter 255 mm - 260 mm
Blade body thickness 1.6 mm - 2.4 mm
Hole diameter
For all countries other than European countries 25.4 mm
For European countries 30 mm
Max. Cutting capacities (H x W) with 260 mm in diameter
Bevel angle
Miter angle
45° (left) 0°
0° 50 mm x 310 mm 91 mm x 310 mm
45° 50 mm x 220 mm 91 mm x 220mm
60° (right) - 91 mm x 153 mm
No load speed (min
-1
) 4,200
Laser Type (LS1017L only) Red Laser 650 nm, 1mW ( Laser Class 2 )
Dimensions (L x W x H) 825 mm x 536 mm x 581 mm
Net weight For all countries other than European countries•••19.4 kg
For European countries•••19.5 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END223-1
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
읭 Read instruction manual.
읭 DOUBLE INSULATION
읭 To avoid injury from flying debris, keep
holding the saw head down, after
making cuts, until the blade has come to
a complete stop.
읭 When performing slide cut, first pull
carriage fully and press down handle,
then push carriage toward the guide
fence.

읭 Do not place hand or fingers close to the
blade.
읭 Adjust sliding fences clear of blade and
blade guard properly.
읭 Never look into the laser beam. Direct
laser beam may injure your eyes.
읭 Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling

Makita LS1017L Specifications

General

Blade Diameter	260 mm
Laser Guide	Yes
Voltage	240 V
Length	825 mm
Width	536 mm
Height	633 mm
Mitre Capacity	0° - 52°
No Load Speed	4300 rpm
Max. Cutting Capacity at 45°	68 x 197 mm
Input Wattage	1, 430 W
Power Input	1, 430 W