Need help?Do you have a question about the Makita LS1040F and is the answer not in the manual?
General| Input power | 1650 W |
|---|---|
| Power source | AC |
| Blade bore | 30 mm |
| Blade diameter | 255 mm |
| Dust bag included | Yes |
| Idle speed (max) | 4600 RPM |
| Miter setting (left) | 45 ° |
| Miter setting (right) | 52 ° |
| Cutting capacity 0° | 93 x 95 mm |
| Cutting capacity 45° miter | 93 x 67 mm |
Weight and Dimensions| Weight | 12600 g |
|---|
Describes the tool's primary purpose and materials it can cut.
Details electrical requirements and safety for operation.
Guidelines for maintaining a safe working environment to prevent accidents.
Crucial precautions for safe use of electrical power tools.
Advice on operator's alertness, PPE, and preventing accidental starts.
Best practices for operating and maintaining the tool safely.
Importance of professional maintenance for tool safety and reliability.
Steps for attaching the auxiliary plate for added support.
Instructions for fitting the workpiece holders for stability.
Guidance on securely fixing the saw to a workbench for stability.
Details on the function and importance of the blade guard.
Explanation of the kerf board's purpose in minimizing tear-out.
How to adjust the saw for optimal cutting depth.
Steps for setting the desired miter cutting angle.
Steps for setting the desired bevel cutting angle.
How to operate the power switch and lock-off button.
Instructions for using the saw's integrated lighting system.
Procedure for safely changing the saw blade.
Instructions for attaching and emptying the dust collection bag.
Critical safety and operational guidance for securing the workpiece.
How to position the sub-fence for specific cuts.
Instructions for installing and using the optional horizontal vise.
Instructions for installing and using the vertical vise.
Procedure for performing straight cuts with the saw.
How to make angled cuts using the miter adjustment.
How to perform cuts at a tilt angle using the bevel adjustment.
Performing cuts with both miter and bevel angles.
Guidance on safely cutting aluminum materials.
How to attach wood facing for cleaner cuts.
Using accessories for efficient cutting of multiple same-length pieces.
Securing the turn base to the 0° miter position for carrying.
Securing the blade to the 0° bevel position for carrying.
How to re-align the saw's angle settings if needed.
Procedure for replacing the lamp in the saw.
How to check and replace worn carbon brushes.
Recommended cleaning and lubrication after each use.
To Next Page
