Models No.
Description
PRODUCT
T
ECHNICAL INFORMATION
CONCEPT AND MAIN APPLICATIONS
Specification
Standard equipment
Optional accessories
P 1/ 9
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
Model No.
479 (18-13/16) 437 (17-1/8)
PC5001C PC5000C
195 (7-5/8)
182 (7-1/8) 235 (9-1/4)
Note: The standard equipment for the tools shown above may vary by country.
PC5001C, PC5000C
Concrete Planer 125mm (5")
Models PC5001C and PC5000C are upgraded sister tools
of PC1100. Features electronic control, allowing for
use of powerful 1,400W motor.
Listed below are specification differences between
PC5001C and PC5000C.
Offset diamond wheel 125mm (5") ........ 1 pc
Hex wrench 5 .......................................... 1 pc
Dust bag assembly .................................. 1 pc
Lock nut wrench ............... 1 pc
Brush set (for spare) ......... 1 set
Steel carrying case ............ 1 pc
Model No.
No load speed: min.-1 = rpm
Type
Hole diameter: mm (")
Wheel
Protection against electric shock
Power supply cord: m (ft)
PC5000CPC5001C
5.0 (16.4)
4.0 (8.9)
Offset diamond wheel
Diameter: mm (")
125 (5)
Double insulation
22.23 (7/8)
5.1 (11.2)
3.4 (7.6)4.5 (9.9)
10,000
Built-in dust extraction Yes
Offset diamond wheel 125mm (5")
Offset diamond wheel 110mm (4-3/8")
Brush set (includes Brush A and Brush B)
Offset diamond wheel 125mm (5")
Brush set (includes Brush A and Brush B)
L
H
W
Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input Output
1,000
Max. Output (W)
110
120
220
230
240
13
10
6.7
6.4
6.1
50/60
50/60
50/60
50/60
50/60
1,400
---
1,400
1,400
1,400
2,600
2,600
2,200
2,200
2,600
Current (A)
600
1,000
1,000
1,000
Yes
Yes
Yes
Yes
Constant speed control
LED indication lamp
Soft start
Electronic current limiter
Anti-restart function
Electronic
control
Yes
PC5001C
PC5000C
L
H
W
PC5001C
PC5000C
Model No.
Loop handle,
D-shaped
Top handle
Auxiliary handle
Yes
No
Base and Front roller
PC5001C
PC5000C
Net weight: kg (lbs)
Weight according to
EPTA-Procedure 01/2003: kg (lbs)
To Next Page
Need help?
General
