Makita RT0700C User Manual

15
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Straight & groove forming bits
• Edge forming bits
• Laminate trimming bits
• Straight guide assembly
• Trimmer guide assembly
• Trimmer base assembly
• Tilt base assembly
• Plunge base assembly
• Offset base assembly
• Templet guide
• Collet cone 6 mm
• Collet cone 6.35 mm (1/4")
• Collet cone 8 mm
• Collet cone 9.53 mm (3/8")
• Wrench 13
• Wrench 22
Trimmer bits
Straight bit
005116
mm
DA L 1L 2
20 50 15
20 6
20E 1/4"
86
8E 1/4"
8
50
18
66
6E 1/4"
6
50 18
8
8
60
25
011929
"U"Grooving bit
R
005117
mm
DAL 1L 2
66
6E 1/4"
66028
R
3
006486
"V"Grooving bit
005118
mm
DAL 1L 2
1/4"
20
50 15
90
006454

Makita RT0700C Specifications

General

Power Input	710W
No Load Speed	10, 000 - 30, 000 RPM
Power Source	Corded
Voltage	230V
Collet Capacity	6mm
Overall Length	200mm
Net Weight	1.8 kg