16 ENGLISH
Optional accessory
Trimming, curved cuts in veneers for furniture and the
Fig.23
1. Install the trimmer guide and guide holder on the
2.
secure the trimmer guide in place.
1.2. Guide holder
3. Trimmer guide
3. When cutting, move the tool with the guide roller
riding the side of the workpiece.
1. Workpiece 2.3. Guide roller
Optional accessory
sheet or similar materials.
1. -
ing screws, and tilt the tool at the desired angle.
2.
Close the locking lever at the desired protrusion of the
3.
the direction of the arrow.
1. Clamping screws 2.
1.
loosening and removing the four screws.
2.
1.2. Screw
Optional accessory
-
nate sheet or similar materials.
Fig.28
1.
1. Pulley 2. Collet nut 3. Collet cone
2.
1. Wrench 2. Pulley 3. Shaft lock
3. Place the collet cone and screw the collet nut on
1. Collet nut 2. Collet cone
4.
Fig.32
5.
pulley completely.
1. Pulley 2.
6. Close the locking lever.
1.
7.
With the hex wrench held in the position as shown in
1. Wrench 2. Hex wrench 3.
8.
procedure in reverse.
Fig.36
1.
1. Screws 2.3. Upper
2.
place it on the grip attachment and secure it with a screw.
1.2. Grip attachment 3.
1. Screw 2.3. Grip
attachment
Optional accessory
CAUTION:
1. To use the tool as a router, install the tool on a
1.2.
To Next Page
Loading...
