16
Section 10 Maintenance and lubrication
Disc and blade maintenance
For cutting and a longer service life carefully check discs, blades and bolts daily. Re-
place worn or damaged blades and hardware immediately using only Malone recom-
mended parts.
Replace blades, bolts and nuts in pairs to maintain balance. Ensure the cutting edge
of blades face the disc rotation direction.
Before performing inspections, maintenance or adjustments of the
mower, stop the tractor engine, remove the key and secure parking
brake. Wait for all moving parts to stop and disconnect the driveline
shaft. Use blocks on mower and tractor to prevent movement.
Cutter bed blade rotation direction
2600TM
3000TM
To Next Page
Loading...