Health & S afety
10
General warnings and regulations
Warning! The instrument or the samples to be measured may be hazardous if
misused. Read and fully understand this section before operating the system.
The instrument must only be stored or operated in environmental conditions conforming
to the specification in the Site requirements section.
Warning! Use of the system in a manner not specified by Malvern Instruments
Ltd. may impair the protection provided by the system.
Electrical warnings and regulations
Warning! The NanoSampler System contains high voltage components. Unless
advised within the content of this manual, only Malvern Instruments trained
personnel are permitted to remove the main covers from the instrument or con-
nected devices.
Warning! This product must be connected to a protective earth. The metal
parts of the optical unit are earthed using a protective earth connection.
If the instrument gets wet (for example, if sample or dispersant is spilt), switch it off and
disconnect it from the mains power supply immediately. Carefully clean and dry the instru-
ment before re-applying power.
The NanoSampler system components are mains powered devices and all power cables
and electrical sockets should be treated accordingly. Do not place cables in positions
where they are likely to become wet.
Power cords and power safety
The notes in this section indicate best practice and should be adhered to when con-
necting the Malvern instrument to the power supply.
To Next Page
Loading...