Appendix
59
Sample capacity 2 racks of 48 1.5mL vials
Maximum viscosity 6.44cP
Vial/Plate
dimensions (incl. cap) Max. plate/vial height: 47 mm (incl.
septa or cap)
Loop volume (sample / buffer) 1000µL
Vial detection Missing vial/well plate detection by sensor
Switching time injection valve Electrically < 100ms
Piercing needle precision ± 0.6mm
Wash solvent
Integrated wash solvent bottle (full 96 wells requires
external bottle of 2L
Wetted parts in flow path SS316, PTFE, EFTE, PEEK, Glass
Chemical compatibility
Components of the NanoSampler that may come into contact with the sample are man-
ufactured from materials that are considered to give the widest protection from chemical
attack. However, it is important to check that any sample used is chemically compatible
with the materials mentioned.
Note: The paint on the housing of the NanoSampler is not compatible with
Chloroform.
To Next Page
Loading...
