Malvern Mastersizer Series User Manual

Sample file:
Monday.SAM
Record Number Run Number
11
22
33
41
52
63
71
82
93
10 1
11 2
12 3
As can be seen, the run number is reset after each batch of 3 samples. So, for
example, to see the data for the second sample taken two hours into Monday, you
will open record number 5 from the MONDAY.SAM sample file.
CHAPTER 3
GETTING STARTED Page 3.9

Malvern Mastersizer Series Specifications

General

Measurement principle	Laser Diffraction
Compliance	ISO 13320, USP <429>, EP 2.9.31
Particle size range	0.01 μm to 3500 μm
Light source	Red laser, Blue laser
Sample dispersion	Wet or dry dispersion
Software	Mastersizer software