Need help?Do you have a question about the Malvern MicroCal iTC200 and is the answer not in the manual?
General| Brand | Malvern |
|---|---|
| Model | MicroCal iTC200 |
| Category | Laboratory Equipment |
| Language | English |
Specifies the intended research application for the MicroCal iTC200 Washing Module.
Outlines essential requirements for operating the system correctly and safely.
Explains the meaning of WARNINGS, CAUTIONS, and NOTICES for safe product use.
Provides helpful information for trouble-free and optimal product usage.
Details the manual's objective to guide users in running the iTC200 and analyzing data.
Defines text formatting used in the manual for clarity.
Lists other user documentation and related literature available for the product.
Explains the purpose of the bottle adapter for using full-size bottles.
Lists all components included in the washing module installation kit.
Identifies bottles by color-coded tops for water, methanol, buffer, and waste.
Details connecting the cleaning device to the washing module's C3 and C4 ports.
Describes connecting the waste lines to the C5 port on the washing module.
Explains how to place the washing module onto the cell unit securely.
Details connecting the syringe needle cleaning tube to the C2 port.
Guides the installation of the Fill Port Adapter (FPA) into the instrument.
Explains routing tubing from bottles to the bottle adapter for fluid supply.
Instructs on bundling and positioning fluid lines to avoid interference.
Details connecting the system components via a USB hub and cables.
Instructs on connecting the cell unit's power cord to a GFCI-protected supply.
Guides connecting the washing module's power supply to a GFCI-protected outlet.
Outlines preparing bottles with water, methanol, and buffer for operation.
Describes priming tubing to ensure full fluid delivery to the washing module.
Provides steps for safely emptying the waste bottle.
Details standard wash procedures like Cell and Syringe Wash, Syringe Fill.
Explains procedures for rinsing the cell with buffer or water.
Covers basic and extended syringe washing and drying procedures.
Lists initial steps for disconnecting power and tubes for maintenance.
Details removing bottles and tubing for cleaning and maintenance.
Guides replacement of tubing for cell cleaning tool, syringe, and waste bottle.
Covers replacing clogged bottle filters and worn cleaning device O-rings.
Provides solutions for common problems like module not working or cleaning failures.
To Next Page
