6 MicroCal iTC
200
Washing Module User Guide
Installation Instructions:
M
icroCal iTC
200
Washing Module with Bottle Adapter
B
ackground:
The bottle adapter allows the MicroCal iTC
200
washing module to be used with full-size bottles.
Prior models of the washing modules used 30 mL vials that required frequent filling.
K
it Contents:
1 washing module with 1 Hub with cable (ASY501700 )
1 Filling Port Adaptor (ASY020506)
1 Cleaning Device (ASY020513)
1 Syringe Needle Cleaning Tube Assembly (ASY020512)
1 Waste Bottle Tube (ASY020555)
1 Drip Tube, Syringe, Wash Module (MSP021321
1 Drip Tube, Cleaning Device, WM (MSP25013)
1 Power Supply, Wall Mount, 12 VDC (PWS020326)
1 005 O-Ring for Cleaning Device & Adapter (ORG0005V-0 10)
2 USB Cable, Short (CBL020330)
1 Waste Bottle Assembly (Gray Cap) (ASY021615)
1 Water Bottle Assembly (Blue Cap)
(ASY021396)
1 Buffer Bottle Assembly (White Cap) (ASY021397)
1 Methanol Bottle Assembly (Red Cap) (ASY021398)
1 Filling Port Adapter with Needle (ASY501340)
1 Extra Tubing Set – One set of 5 per pack (KIT020599)
3 Bottle Tubing, External (ASY021608)
1 Replacement Filter –set of 5 per pack (29-0068-42)
MicroCal iTC200 Washing Module
To Next Page
Loading...