22 MicroCal iTC
200
Washing Module User Guide
P
rocedure:
1. On the Instrument Controls tab, click Detergent Soak and Rinse (Long).
2. Follow the instructions on the screen.
Syringe Wash (Short)
Use this procedure to perform a basic syringe wash only.
Fluid requirement: water and methanol
Time requirement: 10.8 minutes
P
rocedure:
1. On the Instrument Controls tab, click Syringe Wash (Short).
2. Follow the instructions on the screen.
Syringe Wash (Long)
Use this procedure to perform an extended rinse of the syringe.
Fluid requirement: water and methanol
Time requirement: 11.5 minutes
P
rocedure:
1. On the Instrument Controls tab, click Syringe Wash (Long).
2. Follow the instructions on the screen.
Dry Syringe
Use this procedure to dry the syringe after the syringe has been cleaned manually and left
with methanol in it. In this case, the washing module pulls a vacuum through the syringe
for several minutes to dry it.
Fluid requirement: none
Time requirement: 5.8 minutes
P
rocedure:
1. On the Instrument Controls tab, click Cell and Syringe W ash.
2. Follow the instructions on the screen.
MicroCal iTC200 Washing Module
To Next Page
Loading...
