EasyManua.ls Logo

Man D2848 LE201 - Maintenance and Care; Prerequisite; Safety Instructions

Man D2848 LE201
83 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance and Care
MAN Industrial Diesel Engines D2848/40/42 LE201/203/211/213
51
Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
8 Maintenance and Care
8.1 Prerequisite
Before starting any work read and observe the General Safety Instructions and the safety information in this
chapter.
Strictly observe these instructions and act prudently to avoid accidents, personal injury and property damage.
Personal Protective Equipment
The following protective equipment must be worn:
S Protective Clothing
S Safety Shoes
S Safety Gloves
8.2 Safety Instructions
Personnel
S The engine maintenance items described in the Operating Instructions may only be performed by
trained qualified personnel.
Ground rules
WARNING!
Risk of injury caused by improperly performed maintenance!
Improper maintenance can case serious injuries or considerable property damage.
For this reason:
S Ensure that the engine cannot be started be unauthorised persons.
S Perform all maintenance steps in accordance with the instructions in these Operating In
structions.
S Ensure adequate work space before starting any work.
S Make sure work space is kept clean and orderly! Any unused parts or components lying
around are potential sources of accidents.
WARNING!
Risk of injury caused by maintenance work!
Before performing any maintenance work the engine must be set into the maintenance pos
ition if nothing else is explicitly stated.
For this reason:
S The engine must be shut down.
S The engine must have cooled off.
S The battery main switch must be switched off and the ignition key removed.

Table of Contents

Related product manuals