Maintenance and Care
MAN Industrial Diesel Engines D2848/40/42 LE201/203/211/213
53
Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
8.4 Maintenance Work
8.4.1 Engine Oil Change
WARNING!
Risk of scalding!
Engine oil is hot.
For this reason:
S Only touch the oil drain screws using protective gloves
NOTE!
The oil filter elements are to be changed out at every engine oil change.
Drain engine oil - without hand vane pump
Drain engine oil with engine at operating temperature.
NOTE!
Use a container with sufficient ca
pacity to change oil (at least 100
litres). This ensures that oil will not
overflow.
1. Remove oil drain screw from oil filter bowl (ar
row) and completely drain oil.
2. Position container under the drain screw.
3. Remove oil drain screw (1) from oil pan and
completely drain all engine oil.
4. Install oil screw (1) with a new sealing ring and
tighten.
Tightening torque 80 Nm.......................
1
To Next Page
Loading...
