Maintenance and Care
MAN Industrial Diesel Engines D2848/40/42 LE201/203/211/213
54
Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
Drain engine oil - with hand vane pump
Drain engine oil with engine at operating temperature.
NOTE!
Use a container with sufficient ca
pacity to change oil (at least 100
litres). This ensures that oil will not
overflow.
1. Remove oil drain screw from oil filter bowl (ar
row) and completely drain oil.
2. Place container under drain (1). If necessary
use an extension hose.
3. Operate hand vane pump (2) and pump off en
gine oil.
2
1
To Next Page
Loading...
