Technical Data
MAN Industrial Diesel Engines D2848/40/42 LE201/203/211/213
87
Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
D 2842 LE 211
1500 rpm , continuous 15_
1800 rpm, continuous 16_
D 2842 LE 213
1500 rpm , continuous 12_
1800 rpm, continuous 16_
Engine lubrication Force feed lubrication
Oil capacity in oil sump (litres) min. max.
half deep
22 l 30 l
depth 24 l 32 l
deep (land assembly) 40 l 90 l
deep (on-board assembly) 60 l 70 l
Oil change quantity (with filter)
half deep
33 l
depth 35 l
deep (land assembly) 93 l
deep (on-board assembly) 73 l
Lubrication oil pressure during operation
(depends on engine speed, oil temperature and
engine load)
must be monitored by oil pressure monitors/
gauges
Oil filter Full-flow filter with paper filter elements
Engine cooling system Liquid cooling
Coolant temperature
D 2842 LE 201 / 211 80-90_C, 95_C permissible temporarily
D 2842 LE 203 / 213 90-100_C, 105_C permissible temporarily
Electrical equipment
Starter 24 V; 6.5 KW
Alternator 28 V; 35 A, 55 A or 80 A
To Next Page
Loading...
