30 CG-2 | 1.04.00 www.mc-techgroup.com
19.4 RESET OF THE CONTROLLER
A reset out of the temperature lock happens with connected mains:
• operating simultaneously the keys EXIT and
A reset only happens in case the actual temperature deviates by < ±10 °C [±18 °F] from the set temper-
ature.
Another method for a reset that functions without problem is to cut the mains voltage for a short moment
(remove the mains plug).
Watch carefully the control characteristic after reset. This simplifies the di-
agnosis of errors when a failure happens again!
To Next Page
Loading...
