M&R Challenger 2 - Page 50

V.033114
50 M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA
Tel: +630-858-6101 Fax: +630-858-6134 www.mrprint.com | store.mrprint.com
Press Enter Program (8). The indicator below
print head No. 1 displays a 1 and below print head
No. 2 the screen displays the letter F confirming
that the print head will now operate as a flash cure
station.
Turn head No. 1 and head No. 2 Off.
Your program selections now appear on the
Revolver menu.
Step 4
Select Revolution No. 2. Press the data entry cell
(6) to the right of Revolution; a numeric keypad
displays. Enter the number 2 and press Enter.
Step 5
Under Revolution No. 2 select heads 1, 2, 4 and
5 to On.
Place the Single/Multi switch (7) for heads 1, 2, 4
and 5 in the Single position.
Press Enter Program (8). The indicator below
heads 1, 4 and 5 displays a 1. Below head 2, the
screen displays the letter F confirming that the
print head will operate as a flash cure station.
Turn heads 1, 2, 4 and 5 Off.
Your program selections now appear on the
Revolver menu.