V.033114
M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA 51
Tel: +630-858-6101 Fax: +630-858-6134 www.mrprint.com | store.mrprint.com
Select Revolution No. 3. Press the data entry cell
(6) to the right of Revolution; a numeric keypad
displays. Enter the number 3 and press Enter.
Under Revolution No. 3 select heads 2 and 6 to
On (7).
Place the Single/Multi switch (7) for heads 2 and
6 in the Single position.
Press Enter Program (8). The indicator below
head 6 displays a 1. Below head 2 the screen
displays the letter F confirming that the print head
will operate as a flash cure station.
Turn heads 2 and 6 Off.
Your program selections now appear on the
Revolver menu.
Make sure all of the heads that you will be using
are in the On position (7) and your flash unit is
turned On.
To Next Page
Loading...
