MAINTENANCE INSTRUCTIONS
A - GENERAL
- Read carefully the instructions leaflet.
- Clean up the access platform or the concerned area before all operation.
- Wear clothes adapted for the maintenance of the access platform, avoid the jewellery and the floating clothes. If
necessary, tie and protect your hair.
Watch over that the evacuation of the consumables and the spare parts must be made in all safety and ecological way.
- Make the necessary repairings, even minor, immediately.
- Repair all leakages, even minor, immediately.
- Do not try to loosen the connections, the hoses or an hydraulic component with the subpressure circuit.
The handling and the removal of the balancing valve equiping the jacks of your access platform, can be dangerous. A
balancing valve does not be removed when the concerned jack is at rest and the hydraulic circuit under residual pressure.
This operation is possible only with certified staff.
- Remove the variator before all operation of soldering.
- Do not remove metallic parts on the battery.
- The electrical box can be open only by the authorized staff.
- The periodic control specified by the certified control services is necessary.
- Weld, position the weight as close as possible to the place to weld.
To Next Page
Loading...
