3 - 4
MAINTENANCE PERIODICITY
AFTER 50 HOURS OF OPERATION
D1 - Greasing the turret orientation crown
D2 - Check the tightness of the turret orientation crown
D3 - Drain and replace the oil of the reducings of the rear wheels
D6 - Replace the cartridge oil filter hydraulic intake
A - READING OF THE HORAMETER
A1 - Function of the horameter
A2 - Zero reset of the timer
B - EVERY DAY OR EVERY 5 HOURS OF OPERATION
B1 - Check the charge of the battery
B2 - Charge the battery
B3 - Check the hydraulic oil filter
B4 - Check the specific gravity of the battery electrolite
B5 - Check the level of the battery electrolyte
C - EVERY 50 HOURS OF OPERATION
C1 - Grease the axles
C2 - Check the tightness of the wheel nuts
D - EVERY 100 HOURS OF OPERATION
To be carried out once per year.if the access platform has not reached 100 working hours in the year.
D1 - Grease the turret orientation crown
D2 - Check the tight of the screw
D3 - Drain and replace the oil of the reducings of the rear wheels
D4 - Drain and replace the hydraulic oil
D5 - Clean the strainer of the hydraulic circuit
D6 - Replace the cartridge of oil filter hydraulic intake
D7 - Check the tightness of the bolts on the turret's motor.
D8 - Drain the turret's gear motor reduction brake.
E - OCCASIONNAL MAINTENANCE
E1 - Replacement of the batteries
3 - 9
3 - 9
3 - 10
3 - 11
3 - 5
3 - 5
3 - 6
3 - 6
3 - 7
3 - 7
3 - 7
3 - 8
3 - 9
3 - 10
3 - 10
3 - 11
3 - 12
3 - 12
3 - 12
3 - 13
3 - 13
3 - 14
To Next Page
Loading...
