Manitou 120 AETJ COMPACT - 50-HOUR MAINTENANCE TASKS

3 - 8
C - EVERY 50 HOURS OF OPERATION
C1 - GREASE THE AXLES
- Clean, then grease the following points with grease, (See chapter: “LUBRICANTS”) and remove the excess.
Légend: Axle stop Hub Penstock
PLATFORM LINKA
6 points of greasing
SUPERIOR LIFTING
JACK
2 points of greasing
COMPENSATION
JACK
2 points of greasing
HEAD OF THE
INTERMEDIATE HEAD
1 point of greasing
HEAD OF THE
SUPERIOR TIE
2 point of greasing
FOOT OF THE
INTERMEDIATE ARM
1 point of greasing
HEAD OF THE
INFERIOR ARM
1 point of greasing
EXTENSION ARM
JACK
2 points of greasing
SUPERIOR EXTENSION
ARM
FOOT
1 point of greasing
MOVABLE
TELESCOPE
1 point of greasing
INCLINATION JACK
2 points of greasing
FIXED TELESCOPE
1 point of greasing
SEESAW
3 points of greasing
LIFTING JACK OF
THE ARMS
2 point of greasing
FOOT OF THE
SUPERIOR TIE
2 point of greasing
HEAD OF THE
INFERIOR TIE
2 point of greasing
FOOT OF THE
INFERIOR TIE
2 point of greasing
JACK OF PLATFORM
ROTATION
2 points of greasing
FOOT OF THE
INFERIOR ARM
1 point of greasing