INTRODUCTION
- Our access platform are realized with the concern to offer an important facility of maneuvre to the driver and a
maximum of maintenance facility.
- But before the first operation of the access platform, the user must read carefully and understand the different chapters
of this leaflet which will be realized to resolve all the problems of driving and maintenance. According to these
instructions, the user be able to derive the best of the capacitites of the access platform.
- The user must inform himself of the positions and functions of the different instruments of control and command, before
using the access platform.
Never use a new access platform before make the following checks.
GREASING
- Check the different points of greasing and the different levels (see chapter: PERIODICITY OF MAINTENANCE) and
complete if necessary.
The filled up of the lubricants is made in factory for mean climatic uses, of : -15°C to +35°C. For more important uses, it
must, before the first operation, drain and make again the filled up by using adapted lubricants in function of the
ambient temperatures. (inform you, if necessary, to your agent or concessionary).
HYDRAULIC CIRCUIT
- Check that there are no leakage or ooze of oil to the jointings, hoses, tubes and connections by a visual test. If
necessary, tighten or check the defective connections.
- Check the oil level in the tank.
TYRES
- Make sure of the perfect adjustment of the nuts of the wheels (see chapter: C - EVERY 50 HOURS OF OPERATION).
ELECTRICAL CIRCUIT
- Check the level and the specify gravity of the electrolyte in the battery.
- Look at the different components of the electrical circuit like the branchings and the fixings.
IN THE EVENT OF NECESSITY, CONSULT YOUR AGENT OR CONCESSIONARY
To Next Page
Loading...
