1-20
SCRAPPING THE NACELLE
Before scrapping the nacelle, consult your dealer.
RECYCLING OF MATERIALS
METALS
- These are 100% recoverable and recyclable.
PLASTIC MATERIALS
- The plastic parts are marked, in accordance with the regulations in force.
- To facilitate the recycling process, the range of materials used has been limited.
- The majority of the plastic materials are made up of thermoplastics which are easily recyclable by melting, granulating or
grinding.
RUBBERS
- The tyres and seals can be ground to be used in the manufacture of cement or to create reusable granules.
LENSES
- These can be removed and collected for processing by glass manufacturers.
ENVIRONMENTAL PROTECTION
- If you entrust the maintenance of your nacelle to the MANITOU network, the risk of pollution is limited and the contribution to the
protection of the environment is respected.
WORN OR DAMAGED PARTS
- Do not discard parts into the environment.
- MANITOU and its network take an approach that protects the environment through recycling.
WASTE OIL
- The MANITOU ensures that it is collected and treated.
- By entrusting them with your oil changes, the risk of pollution is limited.
WASTE BATTERIES
- Do not throw away any batteries, they contain metals that are harmful to the environment.
- Bring them to the MANITOU network or any other approved collection point.
NOTE: MANITOU’s objective is to manufacture nacelle with the best performance and limit polluting emissions.
647369 (01/03/2017)
78/100 SEC 2 / 120 SE 2