2 - 19
18 - EMERGENCY STOP
This switch is used to stop all movement of the machine in the event of a fault
or of danger.
- Press the button to stop all movement.
- Turn the key a quarter turn to the right to de-activate it - the switch returns
automatically to its original position.
19 - THE ALARM BUZZER
A: TILT
- This buzzer is operated intermittently when the machine has exceeded
the maximum permissible tilt.
- When the tilt limit is reached, all movement is stopped, with the exception
of lowering of the telescopic mast and the extension arm. It can therefore
be returned to an acceptable level of tilt. See also pages 2 to 5.
B: - Overload = The buzzer operates continuously
- The only movement allowed = Lowering of the telescopic mast.
20 - THE DIFFERENTIAL LOCK CONTROL
NOTE : This control must be used at the same time as translation (level)
motion. Contactor 17 must be in (CRAWL) position.
21 - SOUND ALARM BUTTON
See 13 : sound alarm
22 - OVERLOAD LAMP
If the platform is overloaded, this lamp comes on.
23 - TILT LAMP
Tilt becomes excessive:
- an alarm sounds discontinuously in the platform, and the tilt lamp comes on.
20
18
19
23
22
To Next Page
Loading...
