Manitou 80 VJR - Maintenance Periodicity

3 - 4
MAINTENANCE PERIODICITY
AFTER THE FIRST
50 HOURS OF OPERATION
D1 - Grease the turret orientation crown wheel
D2 - Check the tightness of the turret orientation crown wheel
A - READING THE RUNNING-TIME RECORDER
A1 - Operation of the running-time recorder
A2 - Zero reset of the timer
B - EVERY DAY OR EVERY 5 HOURS OF OPERATION
B1 - Check the charge of the battery
B2 - Charge the battery
B3 - Check the hydraulic oil level
B4 - Check the specific gravity of the battery electrolyte
B5 - Check the level of the battery electrolyte
C - EVERY
50 HOURS OF OPERATION
C1 - Grease the axles of the extension actuator
C2 - Grease the axles of the arms
C3 - Grease the steering bearings
C4 - Grease the mast
C5 - Check the tightness of the wheel nuts
D - EVERY 100 HOURS OF OPERATION
To be carried out once per year if the platform has not reached 100 working hours in the year.
D1 - Grease the turret orientation crown wheel
D2 - Check the tightness of the screws of the turret orientation crown wheel
D3 - Drain and replace the hydraulic oil
D4 - Clean the strainer of the hydraulic circuit
E - OCCASIONAL MAINTENANCE
E1 - Replacement of the battery
E2 - Changing a wheel
E3 - Hoisting the platform
E4 - Transporting the platform on a flatbed truck
F - STABILITY TEST ON THE PLATFORM
F1 - Stability test on the platform
3 - 10
3 - 10
3 - 5
3 - 5
3 - 6
3 - 6
3 - 7
3 - 7
3 - 7
3 - 8
3 - 8
3 - 9
3 - 9
3 - 9
3 - 10
3 - 10
3 - 11
3 - 11
3 - 13
3 - 13
3 - 14
3 - 15
3 - 16