Manitou DORADO PRO - Page 20

20
DORADO PRO 37MM SERVICE GUIDE
4
5
Lightly clamp the fork leg in a bike stand. Remove the
top cap from the leg with a 16 notch Bottom Bracket
Tool. Remove the top cap from the compression rod with
a 13mm wrench on the top of the compression rod and a
16 notch Bottom Bracket Tool.
Pour the fluid out of the leg, and slide the inner leg out
of the outer leg. Remove the outer leg from the stand
and let it sit above a drainage pan.
6
Wrap the inner in a rag and clamp it lightly in the bike stand with the compression rod pointing towards the ceiling.
SPRING LEG DISASSEMBLY