Manitou DORADO PRO - Tools and Materials

5
DORADO PRO 37MM SERVICE GUIDE
Below is a list of tools that will be used in the complete service of a Dorado fork:
• Dorado Complete Rebuild Kit – Manitou Part number 141-38361-K001 (Needed for 200 hour complete service)
• Dorado 37mm Seal Kit - Manitou Part Number 141-38380-K019 (Needed for 50 hour basic service)
• Dorado Clamp Blocks – Manitou Part Number 172-31464
• 34mm and 37mm Seal Press – Manitou Part Number 172-37540-K002
• 5wt Maxima Fork oil - Manitou part number 85-0023
• Manitou 5w40 Semi-Bath Oil - Manitou part number 85-0022
• Slickoleum™ Grease - Manitou part number 141-33604-K001
• Torque Wrench
• 12mm Combination Wrench
• 13mm Combination Wrench
• 22mm Combination Wrench
• 22mm Crow’s Foot
• 2mm Allen Wrench
• 2.5mm Allen Wrench
• 5mm Allen Wrench
• 6mm Allen Wrench
• 24mm flat ground Socket with ratchet
• 26mm Socket
• 16 notch Bottom Bracket Tool
• Cassette Tool (only needed for Pro fork IRT removal)
• Small Flat Blade Screwdriver
• Needle Nose Pliers
• Pick or similar tool for removing O-rings
• Blue Loctite
• Cartridge Damper Bleed Kit 141-30694-K020
• T10 Torx wrench
TOOLS AND MATERIALS