16
1
MHT 10120 L M
SS
eries
Lift truck with level corrector.
- Correct the slope using the hydraulic control and check the horizontal position on
the level before lifting the boom(See chapter : INSTRUMENTS AND CONTROLS
in paragraph : 2 - DESCRIPTION).
Apart from the transverse slope of the ground, several parameters can upset the
horizontal position of the lift truck.
• The tyre pressures.
• The stability of the ground.
• The balance of the load.
• Strong wind or stormy conditions.
Before any handling work, check the points above and ensure that the lift truck is com-
pletely horizontal.
(See bubble level)
To Next Page
Loading...
Need help?
General