EasyManuals Logo

Manitou MC 70 Turbo POWERSHIFT Serie 3-E3 User Manual

Manitou MC 70 Turbo POWERSHIFT Serie 3-E3
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
2-17
SPECIFICATIONS AND WEIGHTS
Speed of movement for lift truck in standard configuration on flat
ground (except particular conditions)
Front unladen 1 km/h 4,2
2 km/h 9,8
3 km/h 15,4
4 km/h 27
Rear unladen 1 km/h 4,2
2 km/h 7,9
3 km/h 15,4
4 km/h 27
Standard mast DVT 3M70
Lift height mm 3700
Free lift height mm 130
Overall height (retracted) mm 2785
Overall height (extended) mm 4815
Carriage
Class FEM3
width mm 1470
Weight of forks (each) kg 76
Rated load capacity kg 2600
Rated load capacity with standard mast kg 2600
Effective load capacity on forks with side-shift carriage kg 2600
Distance from the centre of gravity of the load to the base of the forks
mm 500
Lift truck weight without forks or mast kg 4785
Lift truck weight with standard mast
Unladen kg 5800
At rated load kg 8400
Axle weight with standard mast (transport position)
Front unladen kg 2950
Rear unladen kg 2850
Front rated load kg 7320
Rear rated load kg 1080
Drag strain on the coupling hook
Unladen (sliding) daN
At rated load (transmission setting) daN
Pull strain with open carrier
(according to standard ISO 8313)
daN
HYDRAULIC CIRCUIT
Hydraulic pump PARKER
Type Gear
Capacity cm3 37
Max. rating capacity unladen l/mn 85
Flow rate at 1800 rpm l/mn
Filtration
Return µm 10
Suction µm 100
Maximum service pressure
Double mast with all-round vision bar 185
Triple mast with free-acting lift bar 220
Double mast with free-acting lift bar 185
Triple mast without free-acting lift bar 185
Front/rear tilting circuit bar 185/185
Attachment circuit bar 185
Steering circuit bar 145
Hydraulic shock absorber
Capacity L 0,7
Pressure bar 100
HYDRAULIC MOVEMENTS
Lifting movements
Unladen lifting m/s
0,6
Laden lifting m/s
0,5
Unladen lowering m/s
0,5
Laden lowering m/s
0,5
647003 EN (03/01/2012)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitou MC 70 Turbo POWERSHIFT Serie 3-E3 and is the answer not in the manual?

Manitou MC 70 Turbo POWERSHIFT Serie 3-E3 Specifications

General IconGeneral
BrandManitou
ModelMC 70 Turbo POWERSHIFT Serie 3-E3
CategoryForklifts
LanguageEnglish

Related product manuals