2 - 222 - 22
4th if the conditions and state of the road permit it.4th if the conditions and state of the road permit it.
• With a trailer on the road : Set off in 2nd gear and go up to 3rd and then to 4th if the conditions and state of the road permit• With a trailer on the road : Set off in 2nd gear and go up to 3rd and then to 4th if the conditions and state of the road permit
it.it.
•• Handling : 3rd Handling : 3rd or 4th gearor 4th gear..
2nd gear in restricted spaces.2nd gear in restricted spaces.
• Earth • Earth moving : 1st gear.moving : 1st gear.
• Loading • Loading (reclaiming with buc(reclaiming with bucket,ket, manure fork,manure fork, etc.) : etc.) : 2nd gear2nd gear..
16 - P16 - PARARKIKINGNG BBRARAKEKE LELEVEVERR
TTo prevent accidental loosening or release,o prevent accidental loosening or release, the lever is fitted with safety locking.the lever is fitted with safety locking.
- T- To apply the parking brake,o apply the parking brake, pull the lever backwards (position A).pull the lever backwards (position A).
- T- To loosen the parking brake,o loosen the parking brake, release and push the lever forwards (posrelease and push the lever forwards (position B).ition B).
AA
BB
17 - H17 - HYDYDRARAULULICIC COCONTRNTROLSOLS ANANDD TRTRANANSMSMISISSISIONON CUCUTT--OFOFFF
Do not attempt to alter the hydraulic system pressure by interfering with the pressure regulating valve. In the event of suspected malfunc-
Do not attempt to alter the hydraulic system pressure by interfering with the pressure regulating valve. In the event of suspected malfunc-
tion, contact your dealer. ANY ALTERATION MAY RENDER THE WARRANTY NULL AND VOID.tion, contact your dealer. ANY ALTERATION MAY RENDER THE WARRANTY NULL AND VOID.
Use the hydraulic controls carefully without jerking, to Use the hydraulic controls carefully without jerking, to avoid accidents caused by avoid accidents caused by shaking the lift truck.shaking the lift truck.
MLA 628 -120 LSU POWERSHIFT Series 3-E2MLA 628 -120 LSU POWERSHIFT Series 3-E2
NOTE : If necessary use the steering to reset the hydraulicNOTE : If necessary use the steering to reset the hydraulic
control steering control steering accumulatoraccumulator..
LIFTING OF THE LOADLIFTING OF THE LOAD
- The lever A backwards when lifting.- The lever A backwards when lifting.
- The lever A forwards when lowering.- The lever A forwards when lowering.
TILT OF THE CARRIAGETILT OF THE CARRIAGE
- The lever A to the left for reverse tilt.- The lever A to the left for reverse tilt.
- The lever A to the right for forward tilt.- The lever A to the right for forward tilt.
TELESCOPINGTELESCOPING
- The button B up for the extension.- The button B up for the extension.
- The button B down for the retraction.- The button B down for the retraction.
ATTACHMENTATTACHMENT
The button C up or downThe button C up or down
AA
BB
CC
N
N
°°
22
44
44
77
00
88
LL
LL
LL
EE
DD
Do not attempt to alter the hydraulic system pressure by interfering with the pressure regulating valve. In the event ofDo not attempt to alter the hydraulic system pressure by interfering with the pressure regulating valve. In the event of
suspected malfunction, contact your dealer. suspected malfunction, contact your dealer. ANY ALTERATION MAY VOID THE WARRANTY.ANY ALTERATION MAY VOID THE WARRANTY.
WARNINGWARNING
Use the hydraulic controls carefully without sudden movements, to avoid accidents caused by shaking the lift truck.Use the hydraulic controls carefully without sudden movements, to avoid accidents caused by shaking the lift truck.
WARNINGWARNING
CONTENTSCONTENTS