Manitou MSI 50 - Drivers Seat; Longitudinal Adjustment; Seat Suspension Adjustment; Tilting Handle of Wheel

2 - 222 - 22
1 - DRIVER’S SEAT
1
st
ASSEMBLY
FOR OPTIMAL COMFORT, THIS SEAT CAN BE ADJUSTED IN
DIFFERENT WAYS.
LONGITUDINAL ADJUSTMENT
- Pull the locking lever 1 upwards.
- Slide the seat to the required position.
- Release the lever and ensure it returns to the lock position.
SEAT SUSPENSION ADJUSTMENT
- Refer to the seat's graduation.
- Turn handle 2 depending on the driver's weight.
2
nd
ASSEMBLY
FOR OPTIMAL COMFORT, THIS SEAT CAN BE ADJUSTED IN
DIFFERENT WAYS.
LONGITUDINAL ADJUSTMENT
- Pull the locking lever 1 upwards.
- Slide the seat to the required position.
- Release the lever and ensure it returns to the lock position.
SEAT SUSPENSION ADJUSTMENT
- Pull and lift up the locking lever 2 so as to place it into one of these five
positions.
Position A : Light-weight driver (50 kg).
Position B : Intermediate.
Position C : Middle-weight driver.
Position D : Intermediate.
Position E : Heavy-weight driver (120 kg).
ANGLE ADJUSTMENT OF THE BACK-REST
- Pull the locking lever 3 backwards.
- Tilt the back-rest into one of the three possible positions.
- Release the locking lever and ensure it returns to the lock position.
ANGLE ADJUSTMENT OF THE WHOLE SEAT
- Lift up the locking lever 4.
- Tilt the seat forwards or backwards.
- Release the lever and ensure it returns to the lock position.
2 - TILTING HANDLE OF WHEEL
- Turn the lever 1 towards A for loosening.
- Tilt the steering wheel into the required position.
- Turn the lever 1 towards B for blocking.
2
1
1
1
2
3
4
A
B
C
D
E
A
B