Manitou MSI 50 - Braking Oil Tank Sludge Door; Electrical Lifting in Option; Engine Sludge Door; Lifting Cab

2 - 27
14 - BRAKING OIL TANK SLUDGE DOOR
15 - ENGINE SLUDGE DOOR
LIFTING CAB
MANUAL LIFTING WITH AIR SPRING IN STANDARD
Be sure that the mast is tilted forward to the maximum and that the engine is
stopped before lifting the cab.
UNLOCKING OF THE CAB :
- Close the L.H. door.
- Open the R.H. door.
- Open the engine sludge door 15 (Fig. A).
- Push the lever 16 (Fig. B) forward (position A ) to unlock the lifting cab
- Close the engine sludge door 15 (Fig. A).
- Close the R.H. door.
LIFTING OF THE CAB :
- Lift the cab (Fig. C) and incline to the maximum forward.
- Bring back the lever 16 (Fig. B).initial position (position B).
- Engage the safety shore 18 (Fig. D) in its clip ; vertically under the cab.
LOWERING OF THE CAB :
- Re-position the safety shore 18 (Fig. D).
- To decrease the necessary effort to tilt the cab backward, open the R.H.
door and lock it in open position.
- Lower the cab by pulling on the door handle and be sure of its lock.
- Re-close the R.H. door.
ELECTRICAL LIFTING IN OPTION
Be sure that the mast is tilted forward to the maximum and that the engine is
stopped before lifting the cab.
UNLOCKING OF THE CAB :
- Close the L.H. door.
- Open the R.H. door.
- Open the engine sludge door 15 (Fig. A).
- Push the lever 16 (Fig. B) forward (position A ) to unlock the lifting cab.
- Close the engine sludge door 15 (Fig. A).
- Put the ignition on in the lift truck.
15
16
B
A
B
A
C
D
18