2 - 17
HYDRAULIC CIRCUIT
Hydraulic pump
- Type
Gear type with flow divider
- Capacity cm3
44
- Max. rating capacity unladen l/mn
104
- Flow rate at 1600 rpm l/mn
70
Filtration
- Return µm
10
- Suction µm
125
Maximum service pressure bar
260
- Telescoping circuit bar
190 / 260
- Lifting circuit bar
260 / 260
- Tilt circuit bar
260 / 190
- Attachment circuit bar
260
- Steering circuit bar
140
HYDRAULIC MOVEMENTS
Longitudinal stability limiter and warning device
Electronic
Lifting motions (boom retracted)
- Unladen lifting s - m/mn
8 - 33,8
- Laden lifting s - m/mn
9 - 30
- Unladen lowering s - m/mn
5,5 - 49,1
- Laden lowering s - m/mn
5,5 - 49,1
Telescoping motions (boom raised)
- Unladen extending s - m/mn
13,3 - 23,1
- Laden extending s - m/mn
13,5 - 23,5
- Unladen retracting s - m/mn
8,3 - 37,6
- Laden retracting s - m/mn
8,4 - 37,1
Tilting movements
- Unladen digging s - °/s
3 - 48,7
- Forward tilting unladen s - °/s
2,9 - 50,3
SPECIFICATIONS AND WEIGHTS
Speed of movement for lift truck in standard configuration on flat
ground
(except particular conditions)
Front unladen 1 km/h
4,5
2 km/h
7,3
3 km/h
15
4 km/h
25
Rear unladen 1 km/h
4,5
2 km/h
7,3
3 km/h
15
4 km/h
25
Standard attachment
TFF 35 MT-1040
- Weight with forks kg
165
- Weight of forks (each one) kg
67,5
Rated capacity with standard attachment kg
3200
Tipping load at maximum reach on tyres kg
500
Distance from the centre of gravity from the load to the lug of the forks mm
500
Standard lifting height mm
9000
Lift truck weight without attachment kg
7680
Lift truck weight with standard attachment
- Unladen kg
7980
- At rated load kg
11180
Weight per axle with standard attachment (transport position)
- Front unladen kg
3450
- Rear unladen kg
4530
- Front rated load kg
9190
- Rear rated load kg
1990
Weight per axle with standard attachment (boom extended)
- Front rated load kg
7730
- Rear rated load kg
750
Drag strain on the coupling hook
- Unladen (sliding) daN
6110
- At rated load (transmission setting) daN
8250
Pull strain with open carrier
(according to standard ISO 8313)
daN
5770
647449 (30/11/2015)
MT 732/932 ST3B
To Next Page
Loading...
